Application

STEP 1 - Prepare

1. Wash hands and nails with soap and dry them. 

2. Push back cuticles with the manicure stick and clean the surrounding nails.

3. File and shape the free edge.

 

 

 

 

 

 

4. Wipe nails thoroughly with cotton pads and 70% or higher percentage isopropyl alcohol (rubbing alcohol) to remove remaining dust and excess oils.

 

Tips & Tricks

• The nail plate needs to be free from oils, skin and debris and slightly dehydrated before you apply the gel for it to adhere to the nails properly.

STEPS 2 - Color

1. (Optional for longer wear) Apply a thin coat of Peel Off Gel Base Coat Plus. If necessary, use the manicure stick to clean the excess gel from cuticle and skin before curing. 

2. Cure the gel under LED lamp for 30 seconds.

3. Apply a thin coat of your choice of Murron gel nail color. If necessary, use the manicure stick to clean the excess gel from cuticle and skin before curing. 

 

 

 

 

 

 

4. Cure the gel under LED lamp for 30 seconds.

 

 

 

 

 

 

3. (Optional) Repeat for second coat. 

Tips & Tricks

• Apply each coat as thin as possible. If a coat is too thick, it may not be cured properly.
• We recommend to first apply the gel to both thumbs and cure them together. Then apply the gel on the other four nails on one hand and cure two nails at once. Repeat the same steps on the other hand.
• The Murron gel colors and top coat are completely dry after the curing process. There is no need to clean the residue after curing.
• Murron LED Lamp is programmed for 30 seconds with automatic shut off.
• When using the LED lamp on your toenails, rotate the top half of the lamp 180 degree.  

                      

 

 STEP 3 - Protect

1. Apply a thin coat of Murron No Wipe Gel Top Coat and cap the free edge of the nails. If necessary, use the manicure stick to clean the excess gel from cuticle and skin before curing.

 

 

 

 

 

 

2. Cure the gel under LED lamp for 30 seconds. 

 

Removal

1. Lift an edge of the gel with your hand or a manicure stick. Then gently peel off the gel from the surface of the nails.

 

If Peel Off Gel Base Coat Plus is used, 

1. Lift an edge of the gel with your hand or a manicure stick and then gently push off the gel from the surface of the nails.

2. Push off the remaining gel on the nails with your finger pulp. 

 

Tips & Tricks

• If the gel doesn't come off easily, soak fingers in warm water for 2-3 minutes first.